Parts and Their Functions
U
V
W
X
MON SEL |
|
| U MON SEL selector switch | |
| PREVIEW | This switch is used to select the signals | ||
| B SUP |
| ||
|
|
| PED |
|
G | SEQ | IRIS | (PUSH) | which are output from PIX OUT or WFM |
ENC |
| |||
R |
|
|
| OUT on the base station. |
|
|
|
| |
IRIS RANGE |
|
| V IRIS RANGE switch | |
FULL |
|
| ||
|
|
|
| This switch’s setting takes effect when the |
SENSITIVITY |
|
| IRIS switch M has been set to MANUAL. | |
|
|
|
| |
|
|
| Y | When the IRIS RANGE switch is not at |
|
|
|
| the FULL position, the iris can be coarsely |
| RANGE |
| Z | adjusted by the RANGE control X and |
|
|
|
| finely adjusted by the iris control joystick |
|
|
|
| Y. In addition, the joystick’s operation |
|
|
|
| range can be varied using the |
|
|
|
| SENSITIVITY control W. When the IRIS |
Remote Control Operation Panel AJ- | RANGE switch is set to FULL, the | |||
|
|
|
| SENSITIVITY control W and the RANGE |
control X do not operate, and the iris is controlled using the iris control joystick Y.
WSENSITIVITY control
This is used to control the operation range of the iris control joystick Y when the IRIS RANGE switch V is at OFF.
XRANGE control
This is operational when the IRIS RANGE V switch is not set to FULL. It is used to coarsely adjust the iris.
YIris control joystick
When the IRIS switch M is at AUTO, the position set by the joystick is incremented or decremented to the AUTO IRIS LEVEL setting on the SETUP menu.
When the IRIS switch M is at MANUAL, the joystick is used to adjust the iris.
<Note>
Set the MANUAL/AUTO selector switch on the lens to AUTO.
ZM.PED control
This is used to set the master pedestal level.