Parts and Their Functions

J K L

CALL TALLY IRIS

MANUAL

TAUTO

GAIN FILTER GAMMA

EXTENDER

S

 

R

CHECK

MON SEL

QP

JCALL button

This button is used to call the camera. When the camera is called, the button’s

MLED comes on.

NK R TALLY indicator

This indicates the R TALLY signal which

Ois input from the TALLY IN connector of the base station.

LG TALLY indicator

This indicates the G TALLY signal which is input from the TALLY IN connector of the base station.

ENGLISH

MIRIS switch

This is the iris selector switch. Either AUTO or MANUAL is selected.

NAUTO IRIS indicator

This comes on when the IRIS switch M is set to AUTO.

OEXTENDER indicator

This comes on when the extender (a2) of the camera lens is used.

PCHECK button

By pressing this button in succession, the GAIN indicator S > FILTER indicator R > GAMMA indicator T come on in this order, and the GAIN value, FILTER position and master GAMMA value are displayed respectively on the numerical display LED.

QNumerical display LED

This indicates the f-value of the lens. When the GAIN, FILTER or GAMMA setting is changed, it displays the corresponding value. When the CHECK button P is pressed in succession, the f-value, GAIN value, FILTER position, master GAMMA value and f-value are displayed respectively.

<Note>

“- - - ” appears on the LED when the power to the camera main unit is off or when the base station front panel operations are effective (refer to the AJ-BS900H Operating Instructions).

RFILTER indicator

This comes on when the FILTER position appears on the numerical display LED.

SGAIN indicator

This comes on when the GAIN value appears on the numerical display LED.

TGAMMA indicator

This comes on when the master GAMMA value appears on the numerical display LED.

E-6