Panasonic AJ-SD955Bp manual Memory stop function

Setup menus

USER menu		<OPERATION>
No./Item		Description
109	This selects whether to rewind the tape
	automatically to the tape start when the tape
AUTO REW	end is detected.
	0000	OFF : The tape stops at the tape end.
	0001	ON : The tape is rewound to the tape
		start.
110	This selects whether the VTR is to stop
	automatically when the counter value reaches
MEMORY	“0” during a fast forwarding or rewinding
STOP	operation in the CTL mode.
	0000	OFF : The VTR does not stop.
	0001	ON : The VTR stops automatically.
	<Notes>
	OThe stop mode concerned is either the stop or
	the still-picture (SHTL STILL or SLOW STILL)
	mode depending on the setup menu No. 315
	(AFTER CUE-UP) setting.
	OWhen both the AUTO REW function and
	MEMORY function have been selected at the
	same time, the AUTO REW function takes
	precedence.

Memory stop function

The MEMORY STOP function Zero does not work if it is activated point within a range of 0 ± 2 frames.

	3 REW	1	FF
	button		button
4	FF		2	REW
	button			button

!When the FF button is pressed, the VTR performs the regular fast forward operation since the zero point is not located in the direction of operation.

@When the REW button is pressed, the PREROLL lamp lights (the SHTL lamp lights as well), the VTR proceeds with the preroll operation, and it automatically stops when it reaches the position where the counter reads “0.”

#When the REW button is pressed, the VTR performs the regular rewinding operation since the zero point is not located in the direction of operation.

$ When the FF button is pressed, the PREROLL lamp lights (the SHTL lamp lights as well), the VTR proceeds with the preroll operation, and it automatically stops when it reaches the position where the counter reads “0.”

The underlined items indicates the initial setting.

No./Item		Description
111	This selects the output picture in the
	STANDBY OFF (HALF LOADING) and EJECT
FRZ MODE	modes.
SEL
	0000	DIS :
	The video output is muted.
	0001 STB OFF :
	When the STANDBY OFF (HALF LOADING)
	mode is established, the picture being played
	back at the time is frozen and output.
	0002 SOF&EJ :
	When the STANDBY OFF (HALF LOADING)
	or EJECT mode is established, the picture
	being played back at the time is frozen and
	output.
	<Notes>
	OFreeze status complies with the setup menu
	item No. 605 (FREEZE SEL) setting.
	OIn the EJECT mode, freeze is output only when
	BLACK, BLACK1, GRAY or GRAY1 is selected
	as the setup menu item No. 105 (AUTO EE
	SEL) setting.
112	This selects whether video input switching
	using the INPUT SELECT button is to be
V IN SEL INH	enabled or disabled.
	0000	OFF :
	Video input switching using the INPUT
	SELECT button is enabled.
	0001	ON :
	Video input switching using the INPUT
	SELECT button is disabled.
	0002	REC :
	Video input switching using the INPUT
	SELECT button after the unit has been
	transferred to a recording (but not editing)
	mode is disabled.
113	This selects whether audio input switching
	using the INPUT SELECT button is to be
A IN SEL INH	enabled or disabled.
	0000	OFF :
	Audio input switching using the INPUT
	SELECT button is enabled.
	0001	ON :
	Audio input switching using the INPUT
	SELECT button is disabled.
	0002	REC :
	Audio input switching using the INPUT
	SELECT button after the unit has been
	transferred to a recording (but not editing)
	mode is disabled.
	<Note>
	Even when the ON or REC setting is selected to
	disable audio input switching using the INPUT
	SELECT button, it is still possible to set the setup
	menu items No. 715 (CH1 IN SEL), No. 716
	(CH2 IN SEL), No. 717 (CH3 IN SEL), No. 718
	(CH4 IN SEL), No. 719 (D IN SEL12) and No.
	720 (D IN SEL34).

37