Panasonic AJ-SD955Bp manual Cc Rec, Wide Select, Umid REC

Setup menus

USER menu		<VIDEO>
No./Item		Description
623	For setting 7.5% setup processing to be
	performed on input and output signals in the
SETUP 50	DVCPRO50 (50 Mbps) mode.
	When the STOP button is pressed, operation is
	transferred to the sub-screen, and the setup level
	is set for each output. To return from the sub-
	screen, press the STOP button again.
	<Note>
	This setup menu is not displayed in the 625i
	system.
Sub-screen
00	This selects the 7.5% setup processing for
CMPST IN	the input composite signal.
	0000	THRU :
	The signal is recorded in its original form.
	0001	CUT :
	The signal is recorded with the 7.5% setup
	removed.
01	This selects the 7.5% setup processing for
CMPST OUT	the output composite signal.
	0000	THRU :
	The signal is output in its original form.
	0001	ADD :
	The signal is output with the 7.5% setup
	added.
	<Note>
	Bear in mind the setting for sub-screen item No.
	03 (CMPNT OUT) of setup menu item No. 623
	(SETUP 50).
02	This selects the 7.5% setup processing for
CMPNT IN	the input component signal.
	0000	THRU :
	The signal is recorded in its original form.
	0001	CUT :
	The signal is recorded with the 7.5% setup
	removed.
03	This selects the 7.5% setup processing for
CMPNT OUT	the output composite, component and serial
	(digital) signal.
	0000	THRU :
	The signal is output in its original form.
	0001	CUT :
	The signal is output with the 7.5% setup
	removed.
	0002	ADD :
	The signal is output with the 7.5% setup
	added.

The underlined items indicates the initial setting.

No./Item		Description
624	For selecting whether to record the closed
	caption signals multiplexed on the input
CC REC	signals on the tape.
	0000	OFF :
	No closed caption signal is recorded.
	In addition, the EE output signals are blanked.
	0001	ON :
	When a closed caption signal is detected from
	the selected input signal, it can be recorded.
	<Notes>
	OIf SDTI/1394 signals have been selected as
	the input signals, the closed caption signals
	which have been multiplexed onto the input
	signals will be recorded on the tape regardless
	of the setting.
	OThis setup menu is not displayed in the 625i
	system.
645	This selects whether or not to record the
	wide-screen information on the tape.
WIDE SELECT
	0001	WIDE :
	The wide-screen information is not recorded on
	the tape.
	0002 NORMAL :
	The wide-screen information is recorded on the
	tape.
	<Note>
	If SDTI/1394 has been selected as the input
	signals using the INPUT SELECT button, the
	wide-screen information on the input signals will
	be recorded regardless of this menu’s setting.
660	This selects whether or not to record the
	UMID information on the tape.
UMID REC
	0000	OFF :
	UMID information is not recorded on the tape.
	In addition, EE output signals are blanked.
	0001	ON :
	UMID information is recorded on the tape.
	<Notes>
	OIf SDTI/1394 has been selected as the input
	signals using the INPUT SELECT button, the
	UMID information on the input signals will be
	recorded regardless of this menu’s setting.
	OIf THRU has been selected as the setup menu
	item No. 106 (EE MODE SEL) setting, UMID
	information of the EE output signals will be
	blanked.

47