Chapter 2 Parts and their functions

FPLAY/PAUSE button

This is pressed to view the playback picture on the viewfinder screen or using a color video monitor. The button’s lamp comes on during playback.

When it is pressed during playback, the unit is set to pause in the playback mode (PLAY PAUSE), and the button’s lamp flashes. If the unit is left in the pause mode for two minutes, it automatically changes to the stop (STOP) mode.

GREW (rewind) button and lamp

When this button is pressed during stop, the tape is reviewed at high speed. Its lamp lights at this time.

When it is pressed during playback or pause, the tape is reviewed at approximately 4 times the normal tape speed. Both the PLAY lamp and REW lamp light at this time.

HFF (fast forward) button and lamp

When this button is pressed during stop, the tape is cued at high speed. Its lamp lights at this time.

When it is pressed during playback or pause, the tape is cued at approximately 4 times the normal tape speed. Both the PLAY lamp and FF lamp light at this time.

IEMERGENCY screw (inside rubber cap)

If the cassette does not eject even when the EJECT button is pressed, use a screwdriver or similar implement to push and turn the EMERGENCY screw at the same time: this will cause the cassette to be ejected.

For details, refer to “6-3-3 Emergency eject.”

2-4 Menu operation section

2

4

3

2

1

1MENU button

This is used to switch the menu ON and OFF.

2JOG dial button

This is used to select the menu items and perform settings when the MENU button 1 is at the ON position.

3Setup card insertion slot

This is where the SD card (optional accessory) or Multimedia card (optional accessory) is inserted into the unit.

4BUSY (operation mode display) lamp

This lamp shows the operation mode of the setup card. It lights during operation.

<Note>

When this lamp is lighted, refrain from inserting or removing the card.

15