Chapter 5 Preparation

5-4-3 When using a wireless receiver

When using an externally connected wireless receiver

Attach the wireless receiver when a wireless system is to be used.

1 Attach the wireless receiver to the camera attachment.

2 Align the grooves in the camera attachment with the pins on the battery case, etc. to attach the wireless receiver.

Audio output connectors

Wireless receiver

Camera attachment

XLR cable

AUDIO IN connectors

AUDIO IN switches

3 Connect the AUDIO IN connectors on the camera with the wireless receiver using the XLR cable.

4 Set the AUDIO IN switch or switches for the channel or channels to which the XLR cable has been connected to “REAR.”

5 Set the LINE/MIC/+48V selector switch on the rear panel to “MIC.”

When detaching the wireless receiver, push up the lever on the bottom panel of the camera attachment to disengage it.

<Note>

For details on the operations and other aspects of the wireless receiver, refer to the operating instructions which accompany the receiver.

When using a UniSlot ® wireless receiver

1 Remove the slot cover, insert the wireless receiver, and screw it down.

2 Set the AUDIO IN switches to WIRELESS for the audio channels whose audio signals are to be recorded.

5-4-4 When using an audio component

1 Connect the AUDIO IN connectors on the camera with the audio component using the XLR cable.

2 Set the AUDIO IN switch or switches for the channel or channels to which the audio component has been connected to “REAR.”

3 Set the LINE/MIC/+48V selector switch on the rear panel to “LINE.”

LINE/MIC/+48V selector switch

AUDIO IN connectors

AUDIO IN switches

68