Parts and functions (Continued)
Rear panel
!6" !2" !1"
VIDEO OUT CAM RCU
CABLE FREQUENCY LEVEL
50m
10m
!3" !4" !5"
!6" Covering screw
The unit can be used when the four screws are removed. However, do not leave the unit without these screws for long periods of time. When the screws are not in use, they must be stored safely.
<Note>
Do not remove the four screws on the back panel.
!1" Camera connection connector
To connect the
1 8
2 7
9 10
36
4 5
Pin No. | Signal |
1 | CAM DATA (H) |
|
|
2 | CAM DATA (C) |
|
|
3 | CAM CONT (H) |
|
|
4 | CAM CONT (L) |
|
|
5 | ECU_ON |
|
|
6 | Video input |
|
|
7 | GND (Video) |
|
|
8 | Standby |
|
|
9 | +12 V (IN) |
|
|
10 | GND |
|
|
!2" VIDEO OUT connector
An NTSC or PAL monitor is connected for operating the menu on the main unit of the camera recorder.
!3" Cable length selector switch
This switch is on for a 50 m cable.
!4" Frequency characteristics adjustment volume
This adjusts the frequency characteristics of the VIDEO signals.
!5" Level adjustment volume
This adjusts the level of the VIDEO signals.