Connection
1
2
While the power supply of the camera recorder is turned off, connect the RCU 10- pin connector of the camera recorder to the unit with the connection cable.
If settings are made from the camera menu, set the frequency to the frame frequency of the camera recorder and connect an NTSC or PAL monitor.
After turning on the camera recorder power, turn the unit power on.
<Notes>
zThe frame frequency of the camera recorder must be switched before connecting the unit to the camera recorder.
At VIDEO output, NTSC signals are output for 60 Hz operation, while PAL signals are output for 50 Hz operation.
zThe settings for FUNC on the menu determine whether the camera recorder’s settings, which are adjusted when the unit is connected, are returned to the settings before connecting the unit or to the state after adjustment, when the unit is disconnected from the camera recorder.
zDo not forcefully pull the connected cable. When the camera recorder is used while it is being moved, the cable must be fixed to the tripod or the handle of the camera recorder so that no force is applied directly to the connector.
System configuration
Monitor
Camera recorder |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Dedicated |
| Video cable | |||||||||||
Camera connection connector |
| VIDEO OUT connector | |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<Note>
To determine whether the camera recorder supports the use of the unit, consult our sales dealers or the operation manual of the camera recorder.