![](/images/new-backgrounds/1264857/26485711x1.webp)
Introduction
By using this unit,
Notes
The connections other than above examples cannot be done.
When controlling the
•The
•The maximum memory time of the tracing memory is 300 seconds.
•DIAGONAL MOTION cannot be set from ON to OFF or vice versa. It is always in effect.
•PRESET SPEED can be changed by setting DIAGONAL MOTION to ON and adjusting the DIAGONAL SPEED value.
•The maximum controllable distance is 1,000 meters between the
When controlling the AW-PH350 from the AW-RP400:
•The tracing memory data cannot be stored, played or deleted.
•TILT RANGE cannot be switched. It is fixed at 190 degrees.
•Backlash in the
•DIAGONAL MOTION cannot be set.
•The maximum controllable distance is 500 meters between the
- 5 (E) -