Installation Guide
Network Camera | Indoor Use Only |
|
Please read this document before using the product, and save this document for future reference. Panasonic Network Camera Website: http://www.panasonic.com/netcam for customers in the USA and Puerto Rico
Model No. BB-HCM580A BB-HCM581A
(AC Adaptor Type)
(PoE Ready)
This manual is written for both the
Please read the included Important Information before proceeding.
Complete Operating Instructions and all other documentation can be found on the included
•This document (Installation Guide) explains how to physically connect the camera to the power supply and network, as well how to mount or place the camera for regular use.
•The Setup Guide describes how to set up the camera so that it can be accessed using a PC.
•Refer to the Operating Instructions on the
•Refer to the Troubleshooting Guide on the
Abbreviations
•UPnP is the abbreviation for “Universal Plug and Play”.
•The Network Camera is referred to as “the camera” in this document.
• The Setup
Installation Procedure Overview
The following is an overview of the steps required to install and setup the camera. All steps are explained in this document unless otherwise noted.
Preparation
Confirm that you have all the items required for installation.
Camera Diagram
Make sure you know the names of the camera’s physical features.
Connections
Connecting the camera to your network and to the power outlet.
Setup
Setting up the camera (described in the included Setup Guide). This involves configuring the camera so that it can be accessed from a PC.
Mounting
Mounting or placing the camera.
Preparation
1.Confirm the following items are included in the camera’s packaging.
• Additional pieces can be ordered by calling
Main Unit (1 pc.) | Washer S (1 pc.) | Washer L (1 pc.) |
| Order No. XWG26D12VW | Order No. XWG4F16VW |
| Used when securing the safety | Used when securing the safety |
| wire to the camera. | wire to the ceiling. |
Screw A (2 pcs.) | Screw B (5 pcs.) | Screw C (1 pc.) |
Order No. XYN3+J6FJ | Order No. XTB4+20AFJ | Order No. PQHV2610PJ65 |
Used to secure ceiling plate A to | Used to secure ceiling plate B (4 | Used for connecting the safety |
ceiling plate B. | pcs.) and the safety wire (1 pc.) to | wire to the camera. |
| the ceiling. |
|
Ceiling Mounting Cover (1 pc.) | Ceiling Plate A (1 pc.) | Ceiling Plate B (1 pc.) |
Order No. PSKL1023Y2 | Order No. PQZMHCM581A | Order No. PQMD10110Z |
Used when mounting the camera | Used to secure the camera to | Used to secure the camera to the |
on a ceiling. | ceiling plate B. | ceiling. |
AC Adaptor (1 pc.) | AC Cord (1 pc.) | Audio/Video Cord (1 pc.) |
Order No. PQLV202U | Order No. PSJA1069Z | Order No. PSJA1103Y |
Cord Length: About 3 m | Cord Length: About 1.8 m |
|
(9 feet 10 inches) | (5 feet 11 inches) |
|
Safety Wire (1 pc.) | Important Information (1 pc.) | Setup |
Order No. PQME10080Z | Installation Guide | Order No. PQQX15704XCD |
Used to secure the camera when | (this document) (1 pc.) | Contains the Setup Program needed to |
mounting it. | Setup Guide (1 pc.) | configure the camera, as well as the |
|
| camera’s documentation.* |
|
| *See the included Important Information |
|
| for a description of each document. |
2.You will need the following additional items to install and configure the camera.
–a PC (see the system requirements in the Important Information document)
–a router
– a LAN cable
Option for BB-HCM581A
You can also connect the camera using the optional Panasonic
AC Adaptor (1 pc.)
Cord Length: About 3 m (9 feet 10 inches)
AC Cord (1 pc.)
Cord Length: About 1.8 m (5 feet 11 inches)
© 2007 Panasonic Communications Co., Ltd. All Rights Reserved. | 1 |
PQQX15933YA KK0207CM1107 |