Install the Camera Cover.
1 | Put the camera cover over the main unit | 2 | Fasten the camera cover by turning it to |
| and hook the 2 tabs of the camera cover |
| the right. |
to each hole in the plate.
Hole
Tab
Confirm that the 2 tabs are fit to each hole in the plate by watching through the openings.
3 | Attach the 2 caps to lock the cover to the |
| mounting bracket of the camera. |
Note
After the installation, dust, dirt or insects may get into the camera cover. Remove them by regularly removing the camera cover.
■Removing the Camera Cover
Insert a flat head screw driver into the groove and remove the caps, this will unlock the camera cover from the mounting
bracket of the camera. | Groove |
■Wiring Without Making Holes in the Ceiling
Remove the notch from the camera cover and pass the wires through the hole.
Specifications
Dimension (WHD) | Weight | |
|
| |
About 169 mm (6 5/8 inches) ⋅ 154 mm (6 1/16 inches) | About 180 (0.4 lb.) | |
⋅ 169 mm (6 5/8 inches) | ||
| ||
|
|
