Operating Instructions
14
Camera: Performs automatic camera registration setup and manual
registration adding and deletion. (see page 39)
Wireless: Sets up wireless LAN motion mode and wireless security. (see page
47)
Viewnetcam.com: Sets up Viewnetcam.com. (see page 55)
Advanced Setup
Address Translation: Translates both the global address on the WAN side (Internet) and
private address on the LAN side, and also performs setup to access
this product's network from an Internet terminal. (see page 57)
Security: Allows you to set up filtering, and control access to this product at
the touch of a button, and automatically saves a log. (see page 63)
Options: Sets up access on the LAN side, and also connection to the Internet.
(see page 74)
VPN (PPTP): By setting a user name and password, this product allows you to
create a VPN (Virtual Private Network) using PPTP (Point-to-Point
Tunneling Protocol). (see page 85)
Applications: This function allows you to register, execute and delete applications
for use with this product. (see page 91)
Maintenance
Password: Modifies the user name and password to access the setup page.
(see page 94)
Update Firmware*:Updates to the latest version of firmware. (see page 95)
Save Settings: Saves and loads settings. (see page 97)
Restart: Restarts this product. (see page 98)
Factory Default: Initializes this product. The settings are returned to the factory
default. (see pages 98 and 109)
PPPoE Connection: Manually starts or stops the PPPoE connection to the ISP. (see page
99)
Ping: Checks that each device with an IP address is connected. (see page
101)
Information
Status: Displays information such as connection status. (see page 102)
Log: Displays Filtering Log, UPnP Log (general), UPnP Log (CP),
Connection Log, Viewnetcam.com Log, VPN (PPTP) Connection
Log, VPN(IPsec) Connection Log, and Mail Transmission Log. (see
page 105)
Support: Product and support information can be found on the Internet. (see
page 108)
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24