Operating Instructions
30
Tunneling Connection
It is possible to encapsulate IPv6 packets with IPv4 packets and perform IPv6 communication on a
IPv4 network. Take the following steps to set up tunneling connection.
1. Select [IPv6 ISP Registration].
2. Click [Register/Edit] on the IPv6 ISP
registration list.
3. Select Tunneling.
4. Enter ISP Name.
• Enter no more than 20 characters. In the
example right, "abcde" has been entered.
5. Enter the Destination IP Address and
Prefix(LAN), and if specified by the ISP, enter
the IPv6 DNS Server 1, IPv6 DNS Server 2,
and/or IPv6 Address(WAN).
• See the ISP's setup information. To return
to the original settings, click [Cancel].
6. When setup is complete, click [Save and Go to
Connection Mode].
• The connection mode page is displayed.
IPv6 IPv4 IPv6
Internet