Operating Instructions
Notes
•If the image is not displayed properly, try the following 2 URLs.
1.http:// IP address(or URL):Port Number/mobileh for HTML. (or XXXXX.viewnetcam.com:50000/mobileh)
2.http:// IP address(or URL):Port Number/mobilex for XHTML. (or XXXXX.viewnetcam.com:50000/mobilex)
•Only an administrator can control privacy mode.
•In privacy mode, sensor and timer image buffer/transfer features also are stopped.
•When executing [Privacy Mode] while setting [Allowing unregistered users] on the Security: Administrator page (see page 46), an authentication window is displayed. Log in to the camera as an administrator.
•If the users are restricted to level 1 or 2 on the General User page (see page 50), the users do not see some kinds of buttons.
•When pan/tilt reaches the end, the keypad number and character disappear. E.g.: The pan reaches the left end.
"(4)L" disappears. 
•Some mobile phones are not compatible with Panasonic Network Cameras. Some phones may allow viewing only on port 80, and some may not support password authentication. See the Panasonic Network Camera support website at http://panasonic.co.jp/pcc/products/en/netwkcam/ for a mobile phone model list, and the compatibility level which has been verified with the Panasonic Network Camera.
•Some mobile phones display images not at the specified resolution but at a decreased size.
Stopping E-mail Transfer by the Mobile Phone Operation
Executing privacy mode on a mobile phone operation can stop
1.Access the camera from a mobile phone (see page 25) and log in to the camera as an administrator.
2.Execute [Privacy Mode] (see page 25).
•The camera switches to privacy mode and stops
26
