Operating Instructions
36
Notes
• Some wireless devices do not support the WEP 152 bit.
• The camera supports only the open system authenticati on. If the rou ter or
access point is set to shared key authentication, set it to auto or open
system.
4. Click [Save] when finished.
• New settings are saved.
• When finished, "Success!" is displayed.
5. Click [Go to Wireless configuration page].
• The Wireless page is displayed.
6. Set the switch to WIRELESS.
Notes
• It takes about 1 minute for the new settings to be effective.
• It is not possible to access the camera simultaneously by both wired and
wireless connection.
• To communicate using wireless connection, set up the camera by using
wired connection and set the switch from wired to wireless as shown
below.
• When you switch wired to wireless or vice v ersa, restart the camera . Some
routers also may need to be restarted after switching.