Useful Information
Resetting an adaptor
Normally an adaptor does not need to be reset, however, you may need to reset an adaptor if:
•You are concerned that another adaptor may have been accidentally registered to your master. (For example, the adaptor of someone who lives in the same apartment building as you.)
•An error occurs while registering a terminal to the master.
•You are registering an adaptor.
Note
•Resetting a terminal erases its registration to the master. It must be registered to the master again in order to be used.
•If the master is reset, all terminals must be registered to the master again in order to be used.
Follow the procedure below to reset an adaptor.
1.With a pointed object press the FACTORY DEFAULT RESET button on the adaptor for about 3 seconds.
•All the adaptor’s indicators will begin flashing.
2.Once all the adaptor’s indicators stop flashing, the adaptor has been reset.
•Do not unplug the adaptor for about 30 seconds.
18
