Siemens DataNET Hub (DNH) List on, List clear, Logout, Netstat dn, Password password, Reset

Command Descriptions, Continued

list nnn, xxx	List xxx events, starting with number nnn
list on	Continuously list events from the log buffer,
	as they are added (terminate listing with Con-
	trol-C)
list clear	Clear all events from log buffer
login password	Login to hub-half via the RS-232 Configura-
	tion port
logout	Log out of hub-half
netstat dn	Display statistics for DataNET ports
password password	Change login password for hub-half
password
port start port	Start (or re-start) DataNET on a port
port stop port	Stop DataNET on a port (takes a port out of
	service, e.g. for testing)
reset	Reset a hub-half
test port	Put a port into hardware test mode
test off	Turn off test mode
timeout on	Enable user login timeout
timeout off	Disable user login timeout
trace	Display current trace settings.
trace on	Enable frame tracing (start adding selected
	frames to event buffer)
trace off	Disable frame tracing
trace port, port, ... port	Select ports for frame tracing
trace filter	Set filter mode for tracing
trace xxx.xxx.xxx.xxx	Set IP address filter for tracing
trace ports filter	Set trace port list and filter mode in the same
	command
validation timeout	Set the link validation timeout
verbose on	Enable verbose event display
verbose off	Enable single-line summary event display

70 • Command Summary 2000585-001