Siemens DataNET Hub (DNH) user manual Configuring Your PC, Description Instructions

Configuring Your PC

Description

Instructions

The Advance DataNET Hub (DNH) has a built-in utility for configuring its operation. The Windows HyperTerminal program that resides on most PCs can be used to access this utility. Other serial communication pack- ages that support the following settings can also be used.

Baud rate:	57.6k baud
Data bits:	8
Parity:	none
Stop bits:	1
Flow control:	none

This procedure uses the Windows HyperTerminal program, to configure your PC to communicate with the DNH.

1.Click the Start button, and from the Program menu locate the HyperTerminal Icon.

2.Click the HyperTerminal icon to start the Program. The Connection Description dialog box will open.

3.In the Name field, type in a Connection Name. Example: Advance DataNET Hub.

4.In the Icon field select an Icon to represent the name selected.

2000585-001 Data Communications Setup • 49