Siemens DataNET Hub (DNH) user manual Assigning an IP Address, Overview, Available IP Addresses

Assigning an IP Address

Overview	Each individual hub board (“hub-half”) in the system must have a unique
	IP address. This 32-bit number defines each DNH’s network ID and host
	ID. The IP address must be assigned by the user before the unit is net-
	work operational.
	See Setting Network Address page 57, for instructions on how to enter
	the IP address.

IP Address

How to Assign an IP Address

Table 3-1. Available IP Addresses

The IP Address consists of a 32-bit number divided into four 8-bit fields. Each field is expressed as a decimal number from 1 to 255 with each field separated by periods. This is referred to as “dotted decimal” nota- tion. For example, 192.16.9.52 is an IP address.

Ask your network administrator to assign you an IP Address, or if the DNH will be in a closed plant area and not connected to the Internet you can select an address from Table 3-1.

192.165.0.1	192.165.0.15
192.165.0.2	192.165.0.16
192.165.0.3	192.165.0.17
192.165.0.4	192.165.0.18
192.165.0.5	192.165.0.19
192.165.0.6	192.165.0.254
192.165.0.7	192.165.1.254
192.165.0.8	192.165.2.254
192.165.0.9	192.165.3.1 - 192.165.3.254
192.165.0.10

192.165.0.11

192.165.0.12

192.165.0.13

192.165.0.14

2000585-001 Data Communications Setup • 59