GE ZET2P, ZET2S, ZET1S Before a clean cycle, How to set the oven for cleaning, Self-Cleaning Oven

Self-Cleaning Oven

Wall Oven

Before a clean cycle

The oven door must be closed and all controls must be set correctly for the self-clean cycle to work properly.

We recommend venting your kitchen with an open window or using a ventilation fan or hood during the first self-clean cycle.

•Clean soil from the frame around the oven door and outside the door gasket. These areas must be cleaned by hand.

•Do not clean the door gasket by hand as this could damage it.

•Wipe up excess grease and other food spills with a damp cloth. This will minimize the amount of smoke created during self- cleaning.

•Remove all cookware, broiler pan, grid, probe and any aluminum foil from the oven.

•The oven racks may be left in the oven during the self-clean cycle.

•Make sure the oven light lens and lens frame are in place.

•Do not use commercial oven cleaners, abrasives or oven protectors in or near the self-cleaning oven.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any oven. Move birds to another well-ventilated room.

NOTE: Self-Clean will not work if the temperature probe is plugged in or if the Sabbath feature is set.

On double oven models, you can set a clean cycle

in both ovens at the same time. The last oven set will automatically delay its start until the end of the first oven’s clean cycle.

On double oven models, you can use timed baking in one oven and self-clean in the other at the same time.

How to set the oven for cleaning

Double oven display shown.

Oven Mode knob	Temperature knob	Mini-Knob
		Turn to select
		Push to enter

Turn the Oven Mode knob to CLEAN. Turn the Temperature knob to CLEAN.

The oven is set to clean for its normal clean time of 5 hours. (If a clean time less than 5 hours is needed, turn the Mini-Knob to the clean time desired.) Push to enter it.

You can change the clean time to any time between 3 and 5 hours, in 15 minute increments, depending on the amount of soil in your oven.

NOTE: The Mini-Knob must be pushed for the self-clean cycle to start.

If your oven is connected to a 208V electrical supply, we recommend that you set your clean time for 5 hours.

If LOCKED flashes in the display, the self-clean cycle has been selected but the door is not closed. Close the oven door.

The display will show CLEAN and the clean time remaining.

As the oven heats to the clean temperature, the door will lock automatically. The LOCKED light will turn on. The display will show the clean time remaining. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED light goes off.

After the clean cycle is complete and the oven has cooled, END will show in the display and the LOCKED light will turn off. Turn the Oven Mode knob and the Temperature knob to OFF.

To stop a clean cycle, turn the Oven Mode knob and the Temperature knob to OFF. When the LOCKED light goes off, indicating the oven has cooled below the locking temperature, you will be able

to open the door.

26