GE ZET1P, ZET2S, ZET1S Lift-off oven door- removal, Probe, To remove the door, To replace the door

Care and Cleaning

Wall Oven

Lift-off oven door— removal

The door is very heavy. Be careful when removing and lifting the door.

Do not lift the door by the handle.

To remove the door:

1Fully open the door.

2Pull the hinge locks down toward the door frame, to the unlocked position. A tool, such as a small flat-blade screwdriver, may be required.

3Firmly grasp both sides of the door at the top.

4Close door to the door removal position, which is most of the way and lift it up and out until the hinge arm is clear of the slot.

Slot

Hinge lock

Pull hinge locks down to unlock

Removal position

To replace the door:

1Firmly grasp both sides of the door at the top.

2With the door at the same angle as the removal position, seat the indentation of the hinge arm into the bottom edge of the hinge slot. The notch in the hinge arm must be fully seated into the bottom of the slot.

3Fully open the door. If the door will not fully open, the indentation is not seated correctly in the bottom edge of the slot.

4Push the hinge locks up against the front frame of the oven cavity, to the locked position.

Bottom	Hinge arm
edge of
slot

Indentation

Hinge arm

Hinge lock

Probe

5 Close the oven door. Push hinge locks up to lock

The temperature probe may be cleaned with soap and water or a soap-filled scouring pad. Cool the temperature probe before cleaning.

Scour stubborn spots with a soap-filled scouring pad, rinse and dry.

Do not immerse the temperature probe in water.

Do not store the temperature probe in the oven.

35