GE ZET2P Special features of your oven control, Oven thermostat adjustment, Special Features

Special Features

Wall Oven

Special features of your oven control

Your oven has additional Special Features that you may choose to use.

They remain in the control’s memory until the steps are repeated. The Special Features will remain in memory after a power failure.

Either the Oven Mode knob and/or the Temperature knob must be turned

to OFF.

On double oven models, either the Oven Mode knob or the Temperature knob will have to be turned to OFF for each oven.

NOTE: While in the Special Features mode, if the Mini-Knob is not pushed to enter a choice after 60 seconds, the mode will be cancelled (without changes) and the time of day will return to the display.

The following are the features and how you may activate them.

Oven thermostat adjustment

You may find that your new oven cooks differently than the one it replaced. Use your new oven for a few weeks to become more familiar with it. If you still think your new oven is too hot or too cold, you can adjust the thermostat yourself.

To adjust the oven thermostat:

1Push and hold the PROBE and DELAY START buttons at the same time for 4 seconds until the display shows SF (Special Features).

2Push the PROBE button. A “0” will show in the display.

On double wall oven models, a “0” will show in both the upper and lower oven displays. Push the PROBE button a 2nd time (“UPPER” will show in the display) to set the upper oven, and push PROBE a 3rd time (“LOWER” will show in the display) to set the lower oven.

3Turn the Mini-Knob to adjust the oven thermostat up to 35°F hotter or (-) 35°F cooler in 1°F increments.

4Push the Mini-Knob to enter your choice.

Double oven display shown.

	2. Push to choose.
		3. Mini-
		Knob
1. Push and hold at the same time to enter/exit SF.
		Push to
		enter choice

5Push and hold the Mini-Knob for 5 seconds to exit SF (Special Features) and return to the time of day clock.

Do not use thermometers, such as those found in grocery stores, to check the temperature setting of your oven. These thermometers may vary 20–40 degrees.

NOTE: This adjustment will only affect baking temperatures; it does not affect broiling, convection or self-cleaning temperatures. The adjustment will be retained in memory after a power failure.

Tones at the end of a timed cycle

30

At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds until the TIMER button is pushed. This continuous 6-second beep may be cancelled. To cancel the 6-second beep:

1Push and hold the PROBE and DELAY START buttons at the same time for 4 seconds until the display shows SF (Special Features).

2Push the TIMER button to choose between:

con SF bEEP – Continuous Beeps – Reminder beeps will sound after a timed cycle has ended until the TIMER button is pushed.

SF bEEP – No beeps – The reminder beeps after a timed cycle is cancelled.

3Push the Mini-Knob to enter your choice.

4Push and hold the Mini-Knob for 5 seconds to exit SF (Special Features) and return to the time of day clock.

Double oven display shown.

	2. Push to choose.
3. Mini-
		Knob
1. Push and hold at the same time to enter/exit SF.
		Push to
		enter choice

NOTE: On double oven models, this cancels the end-of-cycle tone for both ovens.