Siemens DataNET Hub (DNH) user manual Test Command Timeout Command

Command Descriptions, Continued

“test” Command

“timeout” Command

This command places a selected port into a hardware diagnostic mode. The command

test 4

places port 4 into test mode. The hub will generate poll messages on port 4. All other ports continue to operate normally. The command

test off

turns off test mode. Only one port at a time may be in test mode.

This command may be used to disable the user login timeout. Normally, if a user has not issued a CLI command for five minutes, the hub-half will automatically shut down the user’s login session. This command may be used to defeat (and re-enable) this timeout:

timeout off	Disables timeout. The hub-half will not auto-
	matically log out the user, regardless of the time
	elapsed since the user last issued a CLI com-
	mand.
timeout on	Re-enables the five-minute CLI timer.

2000585-001 Command Summary • 81