Siemens DataNET Hub (DNH) user manual Command Descriptions, Description Unique Commands

Chapter 4

Command Summary

Command Descriptions

Description

Unique Commands

This chapter is intended for maintenance personnel.

This chapter provides definitions for all of the commands you will be us- ing for setup purposes or for performing test diagnostics.

These are the commands that are unique to the Advance DataNET Hub.

config address ip	Set the device IP address for this hub-half
xxx.xxx.xxx.xxx
config device id	Configure the DataNET hub device ID
config display	Display the current non-volatile parameters
config netmask	Set the IP subnetmask for this hub-half
xxx.xxx.xxx.xxx
config iproute	Set the default router IP address for this hub-
xxx.xxx.xxx.xxx	half
config timeserver	Configure the IP address of a DataNET time
xxx.xxx.xxx.xxx	server
date	Set/display time and date
del	Delete selected SAT entries
display	Display SAT table
display links	Display link state table
dn	Displays or edits the parameters for setup
	time or window
download	Download new hub firmware via the RS-232
	Configuration port
events on	Enable reporting of internal messages via the
	internal buffer
events off	Enable reporting of internal messages via the
	internal buffer
help	Lists available CLI commands
list	List next 22 log events
list nnn	List 22 events, starting with number nnn.

2000585-001 Command Summary • 69