Language
From the ‘View’ menu, select ‘Language’, to select one of the supported languages.
Note: The check mark in front of the language indicates that this is the active display language.
▼Set the languages
1From the ‘View’ menu, select ‘Language’.
To change the language in the scanner and printing operator panels, change the display language setting in the Océ Settings Editor.
Help
▼Display help information
1Open the ‘Help’ menu and select ‘Contents’.
Here you find help information for all applications and functions of the Océ TDS800 applications.
Command line parameters
In order to start the remote applications faster, there are 6 command line parameters available.
configfile=<config_file> Sets the configuration file to use.
server=server Sets the specified server as the server to connect to.
language1=lang Specifies the first language in combination with the parameter ‘country1=country’.
country1=country Specifies the first language in combination with the parameter ‘language1=language’.
language2=lang Specifies the second language in combination with the parameter ‘country2=country’.
country2=country Specifies the second language in combination with the parameter ‘language2=language’.
166 | Océ TDS800 User Manual |
