Instructions for safe use
Océ designed products have been tested in accordance with the strictest international safety standards. To help assure safe working with these products it is important that you observe the following safety rules:
Maintenance
■Do not remove any screws from fixed panels.
■Do not carry out maintenance activities except for the parts and maintenance materials mentioned in this manual.
■Do not place any liquids on the machine.
■Use maintenance materials or other materials for their original purpose only. Keep maintenance materials away from children.
■Do not mix cleaning fluids or other substances.
■To avoid the risk of introducing hazards, all modifications to Océ equipment are strictly reserved to properly qualified and trained service technicians.
Connection
■Do not move the machine yourself, but contact your Customer Service.
■If for some reason you have to move the machine yourself, please make sure that the mains power point has the right fuse capacity. See the Océ TDS800 safety data sheet in this appendix for information about maximum current.
■Do not bridge any mechanical or electrical circuit breakers.
■Do not use an extension lead to connect the machine.
■It is recommended to connect only those
■This equipment has not been designed for connection to an IT power system. (An IT power system is a voltage network in which the neutral wire is not connected to earth).
■For equipment connected via a wall socket: locate the machine close to a wall socket that is easily accessible.
■For equipment connected via a fixed connection to the electricity grid: the disconnect device in the fixed connection should be easily accessible.
258 | Océ TDS800 User Manual |
