1The exposure control
2The display
3The Section keys
4The Arrow keys
5The Media selection keys
6The Manual feed key
7The Auto roll key
8The Correction key
9The Stop key
10The Job interrupt key
11The Numeric keys
12The Function keys
13The numeric display
14The Start key
Exposure control The exposure control is located on the left side of the operator panel. The scale displays the current exposure rate. Control the exposure with the keys. More exposure makes the output darker. Less exposure makes the output lighter.
The Media selection keys There are 6 Media selection keys, one for each roll. Press the Media selection key to select the roll with the required format and media type.
The Manual feed key If you want to copy on a material type or size that is not available in one of the roll compartments, press the manual feed key. The key is located on the right section of the operator panel.
The Auto roll key If you select auto roll, the Océ TDS800 will try to use a roll format that matches the original size. After inserting the original, the roll that is used is indicated on the operator panel.
When auto roll is selected, the Océ TDS800 will look for a matching roll of the ‘Standard’ copy material. If such a roll is not found, it will try to find a matching roll of another type of material. The Key Operator can define the ‘Standard’ copy material.
When automatic zoom is selected on the display of the operator panel, together with auto roll, the size of the matching roll does not necessarily have to be the same as the size of the original.
46 | Océ TDS800 User Manual |
