Safety data sheet Océ E1 toner
MATERIAL SAFETY DATA SHEET | Number |
| ||
(93/112/EEC and ISO | Date | July 1997 |
| |
Océ E1 Toner |
| Page | 1 of 2 |
|
|
|
|
| |
|
|
|
| |
1. Product and company identification |
|
|
| |
Product name | Océ E1 Toner |
|
|
|
Packing | Polyethylene bottle, contents 1,0 kg /2.1 lb |
|
|
|
Company | Océ (UK) Ltd. |
|
|
|
Address | Langston Road, Loughton, Essex IG10 3SL |
|
|
|
Telephone |
|
|
| |
Telefax |
|
|
| |
|
|
|
| |
2. Composition / information on ingredients |
|
|
| |
Ingredients | CAS No. | ClassiÞcation | Weight % |
|
Polyester resin |
|
| ||
Iron oxide |
|
| ||
Phenoxy resin | PMN |
|
| |
Carbon black |
|
| ||
Amorphous silica |
| <1 |
| |
3.Hazards identification
In a toner dust cloud the formation of an explosive
Toner dust may cause discomfort for the eyes and respiratory tract, in the same manner as inert nuisance dust.
To our knowledge, with due observance of the recommended exposure limit and of normal hygiene this product presents no health hazard in normal use.
4.First aid measures
Eyes contact | Rinse with plenty of water. |
Skin contact | Wash with cold water and soap. |
Inhalation | Clean nose, mouth, throat. Cough up. Fresh air. |
Ingestion | Rinse mouth with water. If large quantity swallowed seek medical advice. |
For any medical advice take along this material safety data sheet.
5. Fire fighting measures
Extinguishing media | Dry chemical, carbon dioxide, water spray (fog), foam |
Special fire fighting precautions | N.A. |
Hazardous products of decomposition | N.A. |
6.Accidental release measures
Spills can be cleaned with a vacuum cleaner or a damp rag. Do not use warm water, because this makes the powder soft and sticky.
7.Handling and storage
Keep bottle tightly closed to prevent dust formation. Handle carefully. Avoid breathing dust. Keep in a cool dry place (38 oC, 100 oF). Keep away from direct sunlight or heating devices.
No special technical measures for storage.
8.Exposure controls / personal protection
No special technical measures. No personal protective equipment needed.
Industrial hygiene: after skin contact wash with cold water and soap.
Threshold Limit Value for nuisance dust: 10 mg/m3.
Threshold Limit Value for carbon black: 3,5 mg/m3.
Threshold Limit Value for amorphous silica: 10 mg/m3.
continued on the next page
263
