If you can not correct the problem, you can open the output transport unit and remove the paper (see Figure 136 on page 223). If the fuser-section covers remain to flash on the display, check the fuser section again.

[136] Open the transport output unit

Paper jam in the paper roll compartments

How to clear a paper jam in the paper roll compartments

Note: Make sure that you corrected all the problems in the fuser section, before you correct the problem in the roll feed section.

1Completely open the correct paper roll compartment.

2Remove any jammed paper:

Behind the chip tray

Underneath the plate

Underneath the roll 2, the roll 4 or the roll 6 feed plate

3Reload the roll if necessary.

4Close the paper roll compartment.

Problem solving

223

Page 223
Image 223
IBM TDS800 user manual Paper jam in the paper roll compartments