Make a set copy
Set copy is an input mode which enables you to make one job out of multiple originals. It is distinguished from the ‘Multiple sheets’ input mode by the way the job is sorted. See page 58 for a description of the input modes.
▼Make a set copy
1Open the ‘Feeding’ card in the ‘Original’ section.
2Use the ‘Input mode’ function key to select ‘Set‘.
3Make other settings as required and feed the original.
4Press the green Start key to start the copy job.
Your original is fed into the scanner. The printer starts.
5Feed the other originals that make up your set.
When ‘Automatic feed’ is enabled, you do not have to press the green Start key everytime you feed an original.
6When all originals are scanned, press the green Start key to close the set.
7When you want to abort your job, press the red Stop key. When you press the red stop key, the entire job is deleted.
Special copy and scan jobs | 111 |
