Add the toner
If the toner is empty the display shows: ‘Out of toner’ (see Figure 99). You can add toner even while you print a job. You can finish your current job.
Note: If you do not add toner in time, the system will stop.
[99] ‘Out of toner’ message
▼How to add toner
1Shake the toner bottle.
2Loosen the cap.
3Open the front top cover.
Note: Only use E1 toner.
4Open the toner refill opening.
Note: Do not remove the seal of the bottle opening.
5Put the bottle with the ridge into the notch of the fill opening and push it down (see Figure 100).
[100] Put the toner bottle into the fill opening
The seal at the bottle opening is cut at the opening of the toner reservoir, allowing the toner to get out of the wide bottle.
194 | Océ TDS800 User Manual |
