▼ | Shift the image |
1 Open the ‘Layout’ card in the ‘Copy’ section.
[58] Image shift
2Press the ‘Shift’ function key and select a horizontal shift value by pressing the numeric or arrow keys until the required distance is set to shift the image to the left or to the right.
3Press the ‘Shift’ function key again and select a vertical shift value by pressing the numeric or arrow keys until the required distance is set to shift the image upwards or downwards.
4Make other settings as required.
5Feed the original.
Note: You can use horizontal and vertical shift at the same time.
Mirror image
With the Océ TDS800 Scanner you can make a mirror image copy of an original, as shown in the next figure:
[59] Example of a
Special copy and scan jobs | 109 |
