![](/images/new-backgrounds/1190610/190610301x1.webp)
Modes
The Océ TDS800 Queue Manager has the following modes:
■Anonymous user mode
■Repro operator mode
■Key operator mode
■System administrator mode
■Service operator mode
These different modes are designed to limit access to the specific functions to authorized users only.
The anonymous user mode only offers view access of the queue. In this mode, the buttons and menu items are disabled.
The repro operator, the key operator and the system administrator modes allow you to perform a number of activities on the jobs in the queue, with the help of the Abort, Delete, Resume and Hold buttons. The service operator mode is intended for use by Océ technicians.
Note: In the Océ Queue Manager and the Océ System Control Panel, the repro operator, the key operator and the system administrator have the same user rights. In the Océ Settings Editor, however, the user modes offer different rights (see ‘Find system settings in the Settings Editor’ on page 139).
Access The access to the key operator, repro operator, system administrator modes and service operator is password protected to allow only authorized personnel to use particular functions. You can enter these modes by selecting the Logon option from the File menu and by specifying the correct password when prompted for it, (see ‘Log on’ on page 164).
From the ‘File’ menu, select ‘Close’ to exit the Océ Queue Manager.
Job priority The priority of print and copy jobs in the Océ Queue Manager is determined by the order in which they are submitted to the Océ TDS800. However, there is a setting in the Océ Settings Editor which allows you to give copy jobs priority over print jobs (see ‘Find system settings in the Settings Editor’ on page 139).
Océ Power Logic®: Queue Manager | 151 |