![](/images/new-backgrounds/1190610/19061051x1.webp)
Figure 5 on page 26 shows the flow of the timers under the following conditions:
■The system remains idle for the period defined in the Océ Settings Editor.
■Configure the timers in the Océ Settings Editor .
■The power switches of the printer and the scanner are set to the timer position (Shut off timer and Wake up timer only)
Under these conditions the timers work in a circular way. When you use this automatic flow of the Océ TDS800 timers, the system will be warmed up and ready for operation when you need it and will make economic use of power.
The Océ TDS800 printer and scanner are standby
The Océ TDS800 printer and scanner turn themselves on
The Océ TDS800 printer is in low power mode
The Océ TDS800 printer and scanner turn themselves off
The Océ TDS800 printer and scanner are in sleep mode
[5] The automatic flow of the Océ TDS800 timers.
26 | Océ TDS800 User Manual |