![](/images/new-backgrounds/1190610/190610197x1.webp)
The copy size
The copy width depends on the selected roll and the custom defined scan width. The copy length depends on the selected cut option.
▼Copy
1Select ‘auto roll’ on the printer operator panel.
The scanner scans wider than the original. No information is lost.
2Open the ‘Sheet’ card in the ‘Print’ section on the scanner operator panel (see Figure 46).
3Press the ‘Cut length’ function key to select the required cut option:
■Standard, the print length corresponds to a standard format, depending on the media width. When you use ‘Standard cut’ information loss can occur.
■Synchro, the system cuts at the measured length of the original times the zoom factor. The minimum length is 279 mm or 11 inch. When you use ‘Synchro cut’ information loss will not occur.
■Custom (numeric), which cuts copies on a specified length. You can define the copy length yourself, using the arrow keys or the numeric keys.
4Feed the original
5Press ‘Start’.
[46] Define the cut length
Special copy and scan jobs | 99 |