The folder 181
[84] Fold options from the scanner operator panel
3Open the ‘Finishing’ card in the ‘Print’ section.
4Press the ‘Folding’ function key to select ‘Full’ or ‘First fold only’ (see
Figure 85).
5Press the ‘Folded package’ function key and change the length and/or wid th of
the folded package, as required, by using the arrow keys or the numeric keys.
6If required, press the ‘Binding’ function key.
Set the required binding strip using the arrow keys or the numeric keys.
7Make other settings as required.
8Feed the original.
[85] Fold options from the scanner operator panel
You can also select a drawing method and, if needed, a folding length, folding
width and binding strip. When you change the folding length and/or folding
width, and the folder has a belt, you must a lso adjust the side guides of this
unit.