IBM TDS800 user manual Maintenance of the Reinforcement Unit, Clear the waste box

Maintenance of the Reinforcement Unit

The maintenance for the Reinforcement Unit contains:

■Clear the waste box

■Clean the reinforcement knives

Attention: Only use the original Reinforcement Strips from Océ, to prevent the damage to the Reinforcement Unit.

Clear the waste box

If a reinforcement unit is installed, the protective sheet from the reinforcement tape is stored in a waste box.

Note: You can clear the waste box while you print.

▼How to clear the waste box

1Pull the waste box to the left hand side and towards you to open the waste box (see Figure 119).

[119] Open the waste box

2Clear the box.

208 Océ TDS800 User Manual