Belt unit
The belt units offer a large capacity and more flexibility. On the belt unit 170 folded A0 prints can be delivered offset stacked. You can adjust the side guides of the belt, depending on the width of the folded package.
Note: The belt unit can also be selected from the drivers or the scanner operator panel. The remote command overrules the key operator setting.
▼Selecting belt as folded copy delivery on scanner operator panel
1Open the ‘Finishing’ card in the ‘Print’ section of the scanner operator panel.
2Press the ‘Folding’ function key to select full folding.
3Press the ‘Folded copy delivery’ function key to select the belt.
You have 3 options (depending on your configuration): the upper belt, the lower belt of both belts.
▼Adjusting the side guides of the belt
1 Loosen the nuts (see Figure 88).
[88] Adjust the side guides of the belt
2Adjust the plate in accordance with the width of the fold package.
3Tighten the nuts.
Note: If you change the folding width or the folding length, you have to adjust the punch unit.
The folder | 185 |