4Open the top cover of the Reinforcement Unit and remove all pieces of material inside the unit (see Figure 158).
[158] The top cover of the reinforcement unit
5Close the top cover and the front door of the Reinforcement Unit.
Clear tape jams in the Reinforcement Unit
When a tape jam occurs one of the following messages appears on the display:
■‘Reinforcing not possible: tape jam’ for copy jobs
■
■‘Tape jammed in reinforcement unit’ for print and copy jobs while the printer was running.
When a tape jam occurs while the printer runs, the message has a picture of the printer. The picture shows that the side door of the Reinforcement Unit flashes (see Figure 159).
sa
[159] Tape jam in reinforcement unit
236 | Océ TDS800 User Manual |
