IBM TDS800 user manual Set media type

▼Set media type

1Press the ‘On-line’ key on the printer operator panel to put the printer Off-line. The message ‘Off-line’ is displayed in the status window.

Ready to print
1	A1 Paper	2 A2 Paper
3	A0 Paper	4 A3 Paper
5	36 Paper	6 A0 Paper

[7] The Printer Operator panel in Off-line mode

The focus shifts to the Media option (indicated by the shadow effect).

2Use the arrow keys to select the roll or manual feed for which you have just loaded new media.

3Press the right selection key to activate the Mat. (Material) option.

The dotted line around the current selection is changed into an uninterrupted line and the small selection triangles next to the specified material are no longer dimmed.

4Use the arrow keys to select the material you just loaded.

5Press the ‘On-line’ key to put the printer On-line again. The printer now knows which material is used for the specified roll or manual feed.

▼Set media type for manual feed

1Press the ‘On-line’ key on the printer operator panel to put the printer Off-line. The message ‘Off-line’ is displayed in the status window.

2Press the left selection key to shift the focus to the Media option.

A shadow effect is used to indicate that the focus is set to this option.

3Use the arrow keys to select the Manual option.

4Press the right selection key to activate the Mat. (Material) option.

The dotted line around the current selection is changed into an uninterrupted line and the small selection triangles next to the specified material are no longer dimmed.

5Use the arrow keys to select the material you just loaded.

6Press the ‘On-line’ key to put the printer On-line again. The printer now knows which material is used for manual feed.

Using the Océ TDS800 to print 37