24 Océ TDS800 User Manual
[4] Power button on the Océ Power Logic® Controller
▼Turn the Océ TDS800 printer on and off
1Turn the key to the ‘on’ position (see Figure 2).
The system takes about 20 minutes to warm up. When the system is warmed
up, the message ‘Ready to...’ appears on the printer oper ator panel.
2Turn the key to the ‘off’ position (see Figure 2).
Note:Before you turn off the printer, make sure that the printer is not
printing a job.
▼Turn the Océ TDS800 scanner on and off
1Turn the key to the ‘on’ position (see Figure 3)
After a few seconds the message ‘Ready to print’ appears on the scanner
operator panel.
2Turn the key to the ‘off’ position (see Figure 3).
▼Start up the Océ Power Logic Controller
1Turn on the controller and the screen.
After the initial system test of the contr oller the applications, Océ Queue
Manager, Océ System Control Panel, Océ Settings Editor and Océ Scan
Manager are automatically started a nd the controller appli cations are ready for
operation.
Note:The Oc é Settings Editor is minimised to s ave screen estate.
Take the following actions to turn off the controller:
▼Turn off the Océ Power Logic® Controller
1Go to the Océ System Control Panel applicati on.
2Select the ‘Shutdown’ option from the ‘ System’ menu.
3Confirm shutdown by clicking on the ‘Yes’ button in the ‘Sh ut down’ window.