Define settings for the next original

You can define the settings for each original you want to copy. When ‘Automatic feed’ is enabled, you should bear in mind that the original is automatically pulled into the scanner. If you want to be absolutely sure about the settings that belong to an original, insert an original when the settings are correct.

Note: You can turn off Automatic feed on the scanner. This offers you the possibility to change the settings for the next original, even if you already put the original in place on the scanner feed table.

Define settings for the next copy job

1Select all settings required for the next original.

2Insert the next original.

If ‘Automatic feed’ is off, press the start key.

If ‘Automatic feed’ is on, the original is fed automatically.

Note: You can enable or disable this function from the ‘Scanner’ card in the ‘Original’ section.

Account logging

For accounting purposes, the system is able to log job information for each job. The job identification attributes and the number of print jobs are logged in the account file. For more information on account logging see chapter 10 on page 171.

Note: The account settings are only available if the accounting option is enabled in the system configuration.

[20] Accounting function

Using the Océ TDS800 to Copy

61

Page 61
Image 61
IBM TDS800 user manual Define settings for the next original, Account logging