Folder
The Océ TDS800 can have a folder to fold your output. The output is folded according to the selected folding width and length with the drawing method. Set the drawing method in the Océ Settings Editor (see ‘Find system settings in the Settings Editor’ on page 139).
Note: You can only fold paper. Polyester, transparent or vellum media cannot be folded. If you try to fold polyester, transparent or vellum media, a media jam will occur.
Standard folding settings By default, you use the standard folding settings defined for your Océ TDS800 system by the key operator. The following settings are available:
▼Set the folded copy delivery
1Press the ‘Finishing’ card in the ‘Print’ section.
2Press the function key ‘Folded copy delivery’.
3Select ‘Stacker’ or ‘Belt’.
▼Set folding legend
1Press the ‘Feeding’ card in the ‘Original’ section.
2Press the function key ‘Legend location’.
3Select ‘Leading’ or ‘Trailing’.
Note: In the drivers this setting is called the ‘Folding orientation’, with the options ‘Portrait’, ‘Landscape’ and ‘Automatic’.
▼Set the drawing method
1Press the ‘Feeding’ card in the ‘Original’ section.
2Press the function key ‘Drawing method’.
3Select ‘Standard’, ‘Ericsson’ or ‘Afnor’.
▼Set the folded package width
1Press the ‘Finishing’ card in the ‘Print’ section.
2Press the function key ‘Folded package’.
3Select ‘Width’.
4Enter a range between 186 - 230 mm or 7.3 - 9 inch, in steps of 1 mm or 0.1 inch; default 210 mm or 9 inch.
The folder | 179 |
