from the local controller via File Transfer Protocol (FTP) (see Figure 40). Also if during scanning to a remote destination, something goes wrong, you can retrieve your files from the local controller.
Files scanned to a local destination are stored in the directory of the controller. You can retrieve your files from the local host via File Transfer Protocol (FTP). FTP can be done:
1via an internet browser
2an FTP application, or
3via a command line prompt.
[40] How to retrieve scan files
▼Retrieve files via an FTP command line prompt
1Launch an FTP client.
2Enter the ‘ftp’ command.
A DOS box now appears with the FTP prompt.
3Enter the ‘Open’ command followed by either the registered name of the Océ Power Logic® Controller or the IP address (for example: 194.2.66.146) to connect to the Controller and press Enter: ‘open 194.2.66.146’.
Note: Instead of performing steps 2 and 3 you could also enter “ftp host_name” in the FTP client.
The connection with the Controller is now established and a window appears asking you for a user name.
90 | Océ TDS800 User Manual |
