Océ Power Logic®: Remote Logic 169
How to use the remote system
Start up the Océ Remote Logic applications (Océ S ettings Editor, Océ Queue
manager, Océ System control panel), on a remote client after you installed the
software (see ‘Installation procedure for M icrosoft® Windows systems’ on
page 157). In order to use the functionality y ou first have to add an Océ
TDS800 system and then connect to an availabl e Océ TDS800 system.
▼Add an Océ TDS800
1Open the ‘File’ menu and select ‘Connect t o’.
A dialog box will appear with a drop-down list bo x containing the already
added Océ TDS800 systems.
2Click ‘Edit...’. The ‘Edit systems’ dialog box appears.
3Enter the IP address or the name of the Océ T DS800 system you want to
connect to, in the ‘Systems’ text box.
4Click ‘Add’. The system is added to the list. You can add as many syste ms.
Note:You can also remove a n Océ TDS800 system. Sele ct one in the list and
click ‘Remove’.
5Click OK twice to return to the application.
Note:Before you ca n add an Océ TDS800 system, the sys tem has to be
installed and configured by a system consultant or a techni cian.
▼Connect to an Océ TDS800 system
1Open the ‘File’ menu and select ‘Connect t o’.
A dialog box will appear containing a drop-d own list box with the available
Océ TDS800 systems.
2Select one of the available Océ TDS800 systems and click on ‘OK’. When you
connect to another system, all settings have to be retrieved. This may take some
time.