3Check if there are loose reinforcement strips in the unit with the protection sheet still on(see Figure 163).
[163] Situation A: No mechanical error | Situation B: Mechanical error |
4If yes, remove the tape strips in the Reinforcement Unit.
If the protection sheet is not on the reinforcement strip (see situation A in figure 204), there is no mechanical error and you should insert a new tape roll as described in ‘Inserting a new tape roll’ on page 143. If this error frequently occurs you should call the Océ service organisation (see ‘Other problems (call service)’ on page 184).
5Remove all tape between the rollers and knives (see Figure 164)
[164] Remove the tape
6Wire a new trailing strip of tape between the rollers and the knives ‘Change the tape roll in the reinforcement unit’ on page 196.
Problem solving | 239 |
