Skil 2860 manual Not Available on ALL Models, Button Charger, Indicator Light Charger Battery Pack

SM 1619X04717 04-10:SM 1619X04717 04-10 4/22/10 9:57 AM Page 11

When you begin the charging process of the battery pack, a steady green light could also mean the battery pack is too hot or too cold.

The purpose of the light is to indicate that the battery pack is fast-charging. It does not indicate the exact point of full charge. The light

will stop blinking in less time if the battery pack was not completely discharged.

When the battery pack is fully charged, unplug the charger (unless you're charging another battery pack) and slip the battery pack back into the tool handle.

	* NOT AVAILABLE ON ALL MODELS
* BUTTON	FIG. 3
	CHARGER
	BATTERY
	PACK

*BATTERY CHARGE

CONDITION INDICATOR LIGHTS

INDICATOR LIGHT

	CHARGING BATTERY PACK (SC118C CHARGER)
	Place battery pack and charger on flat non-flammable surfaces and away
! WARNING
	from flammable materials when re-charging battery pack.

Plug charger cord into your standard power outlet, then slide battery pack into charger (Fig. 4). The charger’s green light will turn “ON”. The green light remains ‘‘ON’’ as long as charger is plugged in, and does not shut off.

After normal usage, the battery pack requires approximately 4-6 hours or less charging time to become fully charged. If the battery

pack is run-down completely, it may require up to 6 hours charging time to become fully charged.

When the battery pack is fully charged, unplug the charger (unless you're charging another battery pack) and slide the battery pack back into the tool handle.

FIG. 4

INDICATOR LIGHT

CHARGER

BATTERY PACK

-11-