
RESTRICTED USE ONLY | Fargo Electronics, Inc. |
Reviewing the Error Messages for Printer Drivers
This section applies to the Status Monitor requirements for Windows 98Se/Me/2000/XP Printer Drivers. Refer to the Technician Handbook for CardJet Card Printers in Section 1 (as needed).
Reviewing the Status Monitor dialog box and buttons
The Status Monitor only presents itself to the Operator when an error occurs. (Note: The dialog box includes the error message, the cause/solution and the action buttons which allow the Operator to resolve the issue.)
•Graphic Icon: The dialog box also shows a generic graphic icon, shown below, that will appear in the same position within the dialog box for all error messages.
•buttons: Specific or all of the following buttons are provided depending on the specific Printer condition. Each button will display in its set position indicated above regardless of if all or only one button is displayed.
•Error Code: For each error, an error code will also display in the lower
Buttons | Description |
|
|
OK | This OK button closes the dialog box. If not clicked, the dialog box will |
| close automatically once the error is corrected. |
|
|
Cancel Print | The Cancel button cancels the job at Printer and at PC. |
|
|
Help | This Help button opens the Help file, which is a link to the appropriate |
| topic of the HTML Online Operator’s Guide. |
|
|
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) | 80 |