FARGO electronic 410 manual Printer connected to the PC, Printer not connected to the PC

RESTRICTED USE ONLYFargo Electronics, Inc.

Technician Review of Printer Features (continued)

Function	Description
Power	Printer connected to the PC:
button and	• The Power button turns the Printer ON and OFF. (Note: When lit, the
LED
	blue LED light indicates when power is ON.)
	• Press the Power button to turn the Printer ON and OFF.
	• The blue LED above the button turns OFF or ON to indicate when
	power is applied. (Note: This LED will flash when the Printer is
	processing a print job.)
	• If the Power button is pressed during a print job, the print job will be
	lost and the Printer will reset (depends on Windows configuration).
	Printer not connected to the PC:
	• Press the Power button to turn the Printer ON and OFF. (Note: The
	blue LED above the button turns OFF or ON to indicate when power is
	applied. This is the only active button when the Printer is not connected
	to the PC.)
	• All other buttons will not function and a Card Printer self-test will not be
	possible. (Note: When the Printer is not connected and the Card
	Cartridge and Ink Cartridge are not installed, only the Ink LED will flash
	as this is controlled by firmware.)
	• The Card LED will not flash in this mode when the Card Cartridge is not
	installed. (Note: The Printer must be connected to the PC for the Card
	LED to flash.)
	(Note: Avoid pressing multiple buttons simultaneously or pressing and
	holding a button or combination of buttons.)
	See the Interpreting the LED Lights procedure on page 76.

CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 14