FARGO electronic 410 manual Interface to PC and Power Supply The system uses USB

RESTRICTED USE ONLY Fargo Electronics, Inc.

Technician Handbook for CardJet Card Printers (continued)

Topic	Description
Un-	The Printer correctly detects and reports an un-programmed color Ink
programmed	Cartridge via the Ink LED and on-screen message. See Ink LED and
color Ink	Error Messages in Section 2.
Cartridge
Un-	The Printer correctly detects and reports an un-programmed black Ink
programmed	Cartridge via ink LED and on-screen message. See Ink LED and Error
black Ink	Messages in Section 2.
Cartridge
USB Interface	A 1.5MB/sec (12MB/sec) serial communication interface that can
(Universal	support 127 separate devices consisting of 4 wires: power, ground,
Serial Bus;	data in and data out.
electrical	• Interface to PC and Power Supply: The system uses USB
structure)
	interface to communicate to a PC and internal power supply.
	Firmware initializes Fargo Controller Board.
	• Controller: The Fargo Controller supports USB 1.1 support.
	• Firmware: The Firmware is downloaded if the Printer has been
	unpowered and then you power it up and connect the USB cable.
	The Firmware is a part of Fargo PC Driver. To upgrade the
	Firmware, the Operator has to update the Driver.
	• System connections: The system has one USB upstream, type B
	connector to a PC and 3 downstream channels, with internal
	connections going to Fargo Controller, HP Print Engine and optional
	encoding Board.
USB Hub	Windows recognizes three (3) USB devices: the Print Engine, the
	Fargo Controller and an on-Board USB hub (needed to split USB
	upstream into three USB downstream channels).

CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 72